Aeration is the most important system in the overall water treatment project. Other facilities are basically built around the aeration system, so the quality of the aeration will directly affect the water outlet effect. In the water treatment aeration system, a variety of aerators that have been fixedly installed at the bottom of the tank have been reformed and innovative. Advanced anti-buoyancy technology has been adopted, combined with the principle and structure of this product, to carry out simultaneous intermediate
The scientific method of air, suspension installation and free lifting completely replaced the aerator fixedly installed at the bottom of the pool, completely solving the historical problem that the water must be vented for maintenance when the bottom of the fixed installation is broken, leaked or damaged. .
The application of the elevating tube-type microporous aerator has provided more powerful technical guarantee for oxygenation aeration in water treatment. Oxygenation and aeration for urban sewage and industrial wastewater treatment.
Scope of application
It can be used for aerobic breathing and aeration of aquatic plants in artificial rivers, lakes and fish ponds, and can also be used for oxygen supply in other aeration systems such as aeration tanks and biochemical ponds in sewage treatment processes.
1, acid, alkali, benzene, phenol, oil and other media.
2. Oxygen utilization rate, high power efficiency, large service area and low energy consumption.
3. The bubbles are small and uniform, and have good flow rate and condition.
4. It adopts loop layout, convenient installation, uniform gas distribution and low water resistance.
5. The reinforced cutting yarn is added to the rubber film, which is not easy to break and has a long service life.
6, no air purification, no backwash, convenient management.
7. Various aeration devices that originally used fan blower aeration can be directly converted into tubular aerators under the condition that the original fan and intake duct are unchanged.
Honeycomb fillers are divided into three types: ethylene-propylene copolymer, polyvinyl chloride, and glass fiber reinforced plastic.
六角管状，然后采用专利技术，高频焊接成整体产品，到客户现 场安装。 The honeycomb filler uses modified ethylene-propylene copolymer plastic as the material, and the infrared constant temperature mechanically heat- draws it into a hexagonal tube, and then uses patented technology to weld it into a whole product at high frequency and install it at the customer site .
Honeycomb filler is mainly used for various precipitation and sand removal. 水工程中采用最广泛而且成为一项水处理装置。 It is the most widely used water supply and drainage project in the past ten years and has become a water treatment device. It has a wide range of applications,
High processing effect, small footprint, etc. 和生活给水沉淀、污水沉淀、隔油以及尾张浓缩等处理，适用于 新建工程，现有旧池的改造。 It is suitable for sand removal at the water inlet, general industrial and domestic water supply sedimentation, sewage sedimentation, oil separation and tail tension concentration, etc. It is suitable for new construction projects and the reconstruction of existing old ponds.